Kaizen Environmental

Clor-N-Soil 50 (CS-OIL-SG)

Field Test Kit for PCB Screening of Soil at 50 ppm

Clor-N-Soil is a self contained test kit that allows field personnel to perform the test in less than 10 minutes without additional equipment or supplies. The kit can test any type of soil including sand, topsoil, sediment, and clay. All premeasured reagents are sealed in glass ampules for accurate and consistent results.

Clor-N-Oil 50ppm (CL-050-SG)

Field Test Kit for PCB Screening of Electrical Insulating Fluid - 50 ppm Action Level

Clor-N-Oil is a fast, accurate method to test electrical insulating fluids for the presence of PCB. Each pocket-sized kit contains everything necessary to perform the test in less than 5 minutes. All premeasured reagents are sealed in glass ampules for safe, fast, consistent and accurate results. Clor-N-Oil is available for testing transformer oil at four different action levels; 20 ppm, 50 ppm and 500 ppm. When Clor-N-Oil test kits turn purple, you can be assured your oil sample is below the action level.

HydroSCOUT Analyser System % Range (HS-MTR-01)

Field Test for Quantifying Water In Used Oil – Percent

Range

HydroSCOUT is a field portable test that quantifies water concentration in a variety of matrices, (oil, paint, solvents, liquid waste, soil, inks, etc.).
HydroSCOUT can quantify water content in two ranges for used oil, 0 to 20% and 10 to 100%.This method is ideal for accurately determining the true water content in used oil before acceptance or treatment.
The palm sized HydroSCOUT meter is programmed to determine water content in used oil over two common ranges.

Clor-D-Tect Q4000 (Q4-000-SG)

Field test kit for quantifying total (halogens) chlorine in used oil

On-Site test kit for quantifying total (halogens) chlorine in used oil (Waste Oil)

The kit determines the chlorine level of used oil over the range of 200 ppm to 4000 ppm.
The kit has been proven invaluable when different oil lots are blended or when the user must know how close a quantity of waste oil is to the 1000 ppm or 4000 ppm action level.
The test is quick and easy to run, with results obtained in the field in less than 5 minutes with no special training.

Clor-D-Tect 1000 (CD-DET-SG)

Field screening test for total (halogens) chlorine in used oil.

On-Site Test Kit for Total Halogens in Used (Waste) oil

Used oil transporters, generators and facilities that recycle or re-refine used oil can incorporate Clor-D-Tect 1000 into their management of waste oil to prevent costly hazardous waste from being mixed with non-contaminated oil.
Designed for use on-site, the test takes less than 5 minutes to run with no special training.
Each kit comes complete to perform one test, and all premeasured reagents are sealed in glass ampules.

Clor-N-Oil 20ppm (CL-020-SG)

Field Test Kits for PCB Screening of Electrical Insulating Fluid - 20 ppm Action Level

On-Site Testing for PCB in Transformer Oil

Kit contains everything necessary to perform the test in less than 5 minutes.
All premeasured reagents are sealed in glass ampules for safe, fast, consistent and accurate results.
Screening transformer oil with Clor-N-Oil can eliminate non-PCB fluids from costly laboratory analysis and allows a greater number of samples to be tested.
Clor-N-Oil is available for testing transformer oil at four different action levels; 20 ppm, 50 ppm, and 500 ppm.

Clor-N-Oil 500ppm (CL-500-SG)

Field Test Kits for PCB Screening of Electrical Insulating Fluid – 500 ppm Action Level

On-Site Test Kits for Transformer Oil

Designed to be used in the field, Clor-N-Oil is a fast, accurate method to test electrical insulating fluids for the presence of PCB.
Each pocket-sized kit contains everything necessary to perform the test in less than 5 minutes.
Clor-N-Oil is available for testing transformer oil at four different action levels; 20 ppm, 50 ppm and 500 ppm.

HydroCLOR-Q (HY-DRO)

Field Test Kit for Organic Chlorine Determination for Oil/Water Mixtures and Used Antifreeze/Coolant

On-Site Test Kit for Total Organic Chlorine in Waste Water, Used Antifreeze and Bilge water.

The kit can be used on water-soluble cutting fluids, sump and bilge water, antifreeze or any fluid that contains greater than 70% water.
HydroClor-Q only measures "organic" chlorine, therefore inorganic chloride from seawater or other sources will not interfere with the test.
The pocket-sized kit is easy to use and comes complete with everything necessary to perform one test and takes less than 10 minutes to run and quantifies total organic chlorine in the range of 200 ppm to 4000 ppm.

PetroFLAG Reagents (PF-SRP)

TPH Field Test Reagents for PetroFLAG Soil Analyzer

On-Site test Reagents for Total Petroleum Hydrocarbon (TPH) in Soil

The standard PetroFLAG reagents are designed to have a very high extraction efficiency in all types of soil, ranging from coarse sand to marine sediment and clay.
The PetroFLAG reagents consist of patent pending formulations that are safe and easily disposed of as normal laboratory waste.
The standard result range is 15 ppm to 2000 ppm depending on analyte.

PetroFLAG Analyzer System (PF-MTR-01)

Field Test Kit for Hydrocarbons in Soil

On-Site test kit for Total Petroleum Hydrocarbon (TPH) in Soil

The PetroFLAG system is a field portable method for the determination of total petroleum hydrocarbons in soil.
PetroFLAG does not distinguish between aromatic and aliphatic hydrocarbons, but quantifies all fuels, oils, and greases as total hydrocarbons.
Analysis of a 10 gram soil sample is performed using three simple steps: extraction, filtration, and analysis.
The PetroFLAG system is completely field portable. Everything needed to perform ten soil tests can be conveniently carried to the job site in a briefcase size carrying case.

TitraLube TAN (TI-TAN)

Field Test Kit for Quantifying Total Acid Number in Industrial/Lubricating Oils.

CONDITION MONITORING of LUBRICATING OILS

On-Site Test Kit for Quantifying Total Acid Number, (TAN), in Industrial Oils

Oxidation of oil, such as lubricating, hydraulic, pump and other oils, is one main cause of mechanical malfunction. These oils can be analyzed for total acid number quickly and easily by incorporating Titra-Lube TAN test kits.
Designed to be used by non-technical personnel, the kit can accurately detect acid build-up in less than 5 minutes at the job site.
Titra-Lube TAN contains no "F" series solvents. All premeasured reagents are non-hazardous and sealed in glass ampules for consistent, accurate results.
Oil color will not interfere with the test because the colorimetric end point is carried out in the aqueous phase.

TitraLube TBN (TI-LUB)

Field Test Kits for Quantifying Total Base Number, (TBN), in Lubricating Oil in Diesel Engines

CONDITION MONITORING

On-site Test Kit for Total Base Number, (TBN), in Lubricating Oils.

Diesel engine oils can be easily tested for Total Base Number (TBN) on-site or in the laboratory by using Titra-Lube TBN.
TBN is the measure of reserve alkalinity (base) added to lubricating oils to protect the engine from the corrosive effects of acids formed during the combustion of fuels containing sulfur.
Titra-Lube TBN can be used in the field or in a laboratory to accurately determine the oil's TBN level in less than 5 minutes.

Petroleum TPH / BTEX

Strategic Diagnostics test systems for petroleum hydrocarbons are designed for the rapid detection of hydrocarbon and fuel contamination in soil and water samples.
A wide variety of accurate test formats are available including immunoassay, UV fluorescence and turbidimetric.

< TOP OF PAGE

< back to Waste

EnviroPRODUCTS
EnviroPRODUCTS Home Our Commitment Our People Catalogue For Sales & Rental Why Rent? KAIZORB Specialty Products Support Affiliations Links Request a Quote Contact Us	Clor-N-Soil 50 (CS-OIL-SG) Field Test Kit for PCB Screening of Soil at 50 ppm Clor-N-Soil is a self contained test kit that allows field personnel to perform the test in less than 10 minutes without additional equipment or supplies. The kit can test any type of soil including sand, topsoil, sediment, and clay. All premeasured reagents are sealed in glass ampules for accurate and consistent results. Clor-N-Oil 50ppm (CL-050-SG) Field Test Kit for PCB Screening of Electrical Insulating Fluid - 50 ppm Action Level Clor-N-Oil is a fast, accurate method to test electrical insulating fluids for the presence of PCB. Each pocket-sized kit contains everything necessary to perform the test in less than 5 minutes. All premeasured reagents are sealed in glass ampules for safe, fast, consistent and accurate results. Clor-N-Oil is available for testing transformer oil at four different action levels; 20 ppm, 50 ppm and 500 ppm. When Clor-N-Oil test kits turn purple, you can be assured your oil sample is below the action level. HydroSCOUT Analyser System % Range (HS-MTR-01) Field Test for Quantifying Water In Used Oil – Percent Range HydroSCOUT is a field portable test that quantifies water concentration in a variety of matrices, (oil, paint, solvents, liquid waste, soil, inks, etc.). HydroSCOUT can quantify water content in two ranges for used oil, 0 to 20% and 10 to 100%.This method is ideal for accurately determining the true water content in used oil before acceptance or treatment. The palm sized HydroSCOUT meter is programmed to determine water content in used oil over two common ranges. Clor-D-Tect Q4000 (Q4-000-SG) Field test kit for quantifying total (halogens) chlorine in used oil On-Site test kit for quantifying total (halogens) chlorine in used oil (Waste Oil) The kit determines the chlorine level of used oil over the range of 200 ppm to 4000 ppm. The kit has been proven invaluable when different oil lots are blended or when the user must know how close a quantity of waste oil is to the 1000 ppm or 4000 ppm action level. The test is quick and easy to run, with results obtained in the field in less than 5 minutes with no special training. Clor-D-Tect 1000 (CD-DET-SG) Field screening test for total (halogens) chlorine in used oil. On-Site Test Kit for Total Halogens in Used (Waste) oil Used oil transporters, generators and facilities that recycle or re-refine used oil can incorporate Clor-D-Tect 1000 into their management of waste oil to prevent costly hazardous waste from being mixed with non-contaminated oil. Designed for use on-site, the test takes less than 5 minutes to run with no special training. Each kit comes complete to perform one test, and all premeasured reagents are sealed in glass ampules. Clor-N-Oil 20ppm (CL-020-SG) Field Test Kits for PCB Screening of Electrical Insulating Fluid - 20 ppm Action Level On-Site Testing for PCB in Transformer Oil Kit contains everything necessary to perform the test in less than 5 minutes. All premeasured reagents are sealed in glass ampules for safe, fast, consistent and accurate results. Screening transformer oil with Clor-N-Oil can eliminate non-PCB fluids from costly laboratory analysis and allows a greater number of samples to be tested. Clor-N-Oil is available for testing transformer oil at four different action levels; 20 ppm, 50 ppm, and 500 ppm. Clor-N-Oil 500ppm (CL-500-SG) Field Test Kits for PCB Screening of Electrical Insulating Fluid – 500 ppm Action Level On-Site Test Kits for Transformer Oil Designed to be used in the field, Clor-N-Oil is a fast, accurate method to test electrical insulating fluids for the presence of PCB. Each pocket-sized kit contains everything necessary to perform the test in less than 5 minutes. Clor-N-Oil is available for testing transformer oil at four different action levels; 20 ppm, 50 ppm and 500 ppm. HydroCLOR-Q (HY-DRO) Field Test Kit for Organic Chlorine Determination for Oil/Water Mixtures and Used Antifreeze/Coolant On-Site Test Kit for Total Organic Chlorine in Waste Water, Used Antifreeze and Bilge water. The kit can be used on water-soluble cutting fluids, sump and bilge water, antifreeze or any fluid that contains greater than 70% water. HydroClor-Q only measures "organic" chlorine, therefore inorganic chloride from seawater or other sources will not interfere with the test. The pocket-sized kit is easy to use and comes complete with everything necessary to perform one test and takes less than 10 minutes to run and quantifies total organic chlorine in the range of 200 ppm to 4000 ppm. PetroFLAG Reagents (PF-SRP) TPH Field Test Reagents for PetroFLAG Soil Analyzer On-Site test Reagents for Total Petroleum Hydrocarbon (TPH) in Soil The standard PetroFLAG reagents are designed to have a very high extraction efficiency in all types of soil, ranging from coarse sand to marine sediment and clay. The PetroFLAG reagents consist of patent pending formulations that are safe and easily disposed of as normal laboratory waste. The standard result range is 15 ppm to 2000 ppm depending on analyte. PetroFLAG Analyzer System (PF-MTR-01) Field Test Kit for Hydrocarbons in Soil On-Site test kit for Total Petroleum Hydrocarbon (TPH) in Soil The PetroFLAG system is a field portable method for the determination of total petroleum hydrocarbons in soil. PetroFLAG does not distinguish between aromatic and aliphatic hydrocarbons, but quantifies all fuels, oils, and greases as total hydrocarbons. Analysis of a 10 gram soil sample is performed using three simple steps: extraction, filtration, and analysis. The PetroFLAG system is completely field portable. Everything needed to perform ten soil tests can be conveniently carried to the job site in a briefcase size carrying case. TitraLube TAN (TI-TAN) Field Test Kit for Quantifying Total Acid Number in Industrial/Lubricating Oils. CONDITION MONITORING of LUBRICATING OILS On-Site Test Kit for Quantifying Total Acid Number, (TAN), in Industrial Oils Oxidation of oil, such as lubricating, hydraulic, pump and other oils, is one main cause of mechanical malfunction. These oils can be analyzed for total acid number quickly and easily by incorporating Titra-Lube TAN test kits. Designed to be used by non-technical personnel, the kit can accurately detect acid build-up in less than 5 minutes at the job site. Titra-Lube TAN contains no "F" series solvents. All premeasured reagents are non-hazardous and sealed in glass ampules for consistent, accurate results. Oil color will not interfere with the test because the colorimetric end point is carried out in the aqueous phase. TitraLube TBN (TI-LUB) Field Test Kits for Quantifying Total Base Number, (TBN), in Lubricating Oil in Diesel Engines CONDITION MONITORING On-site Test Kit for Total Base Number, (TBN), in Lubricating Oils. Diesel engine oils can be easily tested for Total Base Number (TBN) on-site or in the laboratory by using Titra-Lube TBN. TBN is the measure of reserve alkalinity (base) added to lubricating oils to protect the engine from the corrosive effects of acids formed during the combustion of fuels containing sulfur. Titra-Lube TBN can be used in the field or in a laboratory to accurately determine the oil's TBN level in less than 5 minutes. Petroleum TPH / BTEX Strategic Diagnostics test systems for petroleum hydrocarbons are designed for the rapid detection of hydrocarbon and fuel contamination in soil and water samples. A wide variety of accurate test formats are available including immunoassay, UV fluorescence and turbidimetric. < TOP OF PAGE < back to Waste

EnviroPRODUCTS