Kaizen Environmental

HydroSCOUT Analyser System % Range (HS-MTR-01)

Field Test for Quantifying Water In Used Oil – Percent

Range

HydroSCOUT is a field portable test that quantifies water concentration in a variety of matrices, (oil, paint, solvents, liquid waste, soil, inks, etc.).
HydroSCOUT can quantify water content in two ranges for used oil, 0 to 20% and 10 to 100%.This method is ideal for accurately determining the true water content in used oil before acceptance or treatment.
The palm sized HydroSCOUT meter is programmed to determine water content in used oil over two common ranges.

Clor-D-Tect 1000 (CD-DET-SG)

Field screening test for total (halogens) chlorine in used oil.

On-Site Test Kit for Total Halogens in Used (Waste) oil

Used oil transporters, generators and facilities that recycle or re-refine used oil can incorporate Clor-D-Tect 1000 into their management of waste oil to prevent costly hazardous waste from being mixed with non-contaminated oil.
Designed for use on-site, the test takes less than 5 minutes to run with no special training.
Each kit comes complete to perform one test, and all premeasured reagents are sealed in glass ampules.

HydroCLOR-Q (HY-DRO)

Field Test Kit for Organic Chlorine Determination for Oil/Water Mixtures and Used Antifreeze/Coolant

On-Site Test Kit for Total Organic Chlorine in Waste Water, Used Antifreeze and Bilge water.
- The kit can be used on water-soluble cutting fluids, sump and bilge water, antifreeze or any fluid that contains greater than 70% water.
- HydroClor-Q only measures "organic" chlorine, therefore inorganic chloride from seawater or other sources will not interfere with the test.
- The pocket-sized kit is easy to use and comes complete with everything necessary to perform one test and takes less than 10 minutes to run and quantifies total organic chlorine in the range of 200 ppm to 4000 ppm.

Petroleum TPH / BTEX

Strategic Diagnostics test systems for petroleum hydrocarbons are designed for the rapid detection of hydrocarbon and fuel contamination in soil and water samples.
A wide variety of accurate test formats are available including immunoassay, UV fluorescence and turbidimetric.

< TOP OF PAGE

< back to Water

EnviroPRODUCTS
EnviroPRODUCTS Home Our Commitment Our People Catalogue For Sales & Rental Why Rent? KAIZORB Specialty Products Support Affiliations Links Request a Quote Contact Us	HydroSCOUT Analyser System % Range (HS-MTR-01) Field Test for Quantifying Water In Used Oil – Percent Range HydroSCOUT is a field portable test that quantifies water concentration in a variety of matrices, (oil, paint, solvents, liquid waste, soil, inks, etc.). HydroSCOUT can quantify water content in two ranges for used oil, 0 to 20% and 10 to 100%.This method is ideal for accurately determining the true water content in used oil before acceptance or treatment. The palm sized HydroSCOUT meter is programmed to determine water content in used oil over two common ranges. Clor-D-Tect 1000 (CD-DET-SG) Field screening test for total (halogens) chlorine in used oil. On-Site Test Kit for Total Halogens in Used (Waste) oil Used oil transporters, generators and facilities that recycle or re-refine used oil can incorporate Clor-D-Tect 1000 into their management of waste oil to prevent costly hazardous waste from being mixed with non-contaminated oil. Designed for use on-site, the test takes less than 5 minutes to run with no special training. Each kit comes complete to perform one test, and all premeasured reagents are sealed in glass ampules. HydroCLOR-Q (HY-DRO) Field Test Kit for Organic Chlorine Determination for Oil/Water Mixtures and Used Antifreeze/Coolant On-Site Test Kit for Total Organic Chlorine in Waste Water, Used Antifreeze and Bilge water. The kit can be used on water-soluble cutting fluids, sump and bilge water, antifreeze or any fluid that contains greater than 70% water. HydroClor-Q only measures "organic" chlorine, therefore inorganic chloride from seawater or other sources will not interfere with the test. The pocket-sized kit is easy to use and comes complete with everything necessary to perform one test and takes less than 10 minutes to run and quantifies total organic chlorine in the range of 200 ppm to 4000 ppm. Petroleum TPH / BTEX Strategic Diagnostics test systems for petroleum hydrocarbons are designed for the rapid detection of hydrocarbon and fuel contamination in soil and water samples. A wide variety of accurate test formats are available including immunoassay, UV fluorescence and turbidimetric. < TOP OF PAGE < back to Water

EnviroPRODUCTS

Petroleum TPH / BTEX