|
Drum Skimmer
Drum skimmers have a patented oleophiliccoating that provides high recovery efficiency.These skimmers are effective for a wide range ofoil viscosities, with very little water pick-up. Theyprovide efficient oil recovery in both spill-response and industrial applications. Mechanicaloil recovery is accomplished through theadhesion of various oil types to the rotatingcylindrical drum. A scraper removes the oil, whichis collected in the skimmer's sump for transfer by a pump.
Rope-Mop Skimmers
Rope-mop skimmers are versatile,economical skimmers that use anoleophilic rope mop to collect oil fromsurface water. The oil is then squeezed forcollection out as the rope passes throughthe skimmer. This skimmer is unaffectedby floating debris, and has a long wear life.
Floating Weir Skimmer
High-capacity skimmers process up to 1,000gallons/minute of debris-free water inindustrial, wastewater, and oil-spill cleanupapplications. These medium-capacityfloating skimmers are versatile oil-recoverydevices that are adjusted by varying thepumping rate. A high rate lowers the liquidlevel in the buoyancy tank, tilting the unitforward and increasing weir immersion. Aslow rate decreases weir immersion forhigh-efficiency collection even with very thinoil slicks.
The Portable Tote-It
- Lightweight for portability; approximately 36 pounds
- Can be installed permanently in limited access areas
- Oil removal rates up to 12 gph (45 lph)
- Standard length is 5' center to center (10' maximum)
- For medium duty applications; parts washers, tanks, etc.
Oil Grabber Model 4
- A single unit elevates and separates oil at a rate up to 20 gph
- Lifts oil up to 100' without the need of expensive pumps
- Maintains skimming efficiency with fluctuating fluid level
- Can be used in depths as shallow as one foot
- Requires no tank modifications in most applications
- Operates in turbulent liquid using optional tail pulley cage and tether assembly
- Easy mounting and fast cleaning, with minimal maintenance
Oil Grabber Model 8
- Similar to the Model 4 with additional features
- A single unit elevates and separates oil at a rate up to 40 gph
- Can be used with a full range of Abanaki options (heater, debris rakes,
belt and tail pulley tethers, etc.)
- Saves coolant and conserves wash water
- Flagship unit of Abanaki's product line
Oil Grabber Model MB
• Designed for jobs that require high capacity oil removal
• Utilizes continuous belts and wipers to remove oil from the fluid surface.
• Each belt increases the removal rate by up to 40 gph o 2 x 8 skims 80 gph
o 3 x 8 skims 120 gph
o 5 x 8 skims 200 gph
Oil Boss
- Skims up to 16 gph
- Completely constructed of Stainless Steel
- Drive unit is completely covered
- Comes with a pilot light and on/off selector
- Easily decontaminated
Grease Grabber
- Abanaki's most rugged unit
- Works for both greases and oils
- Grease removal rates up to 160 gph (606 lph)
- Designed for extremely demanding environments
- Suitable for outdoor drainage pits in primary metal mills
- Optional boom mast mount with swing arm for large pits and tanks
- Integral 700W heater keeps skimmed grease fluid
for easy discharge
PetroXtractor - Well Oil Skimmer
- Used primarily for groundwater remediation through monitoring and remediation wells
- Comes in three varieties
- PX-A for 2" diameter wells (3gph, SAE 30)
- PX-B for 4" diameter wells (6gph, SAE 30)
- PX-C for 6" diameter wells (12 gph, SAE 30)
- Works for LNAPL's and some DNAPL's (coal tar, #6 fuel, etc.)
- Options include: explosion proof setup, below grade mounting kits, timer, housing 55 gallon drum shutoff switch and air motors
|
